abrapox
★ FEATURED
VELOX NO 220
ABRAPOX VELOX NO 220
Professional abrasive solution for marble and natural stone surface finishing.
APOX
CODE: Marble Mesh
Click to enlarge
Parti Garantisi
R&D laboratory approved standard viscosity and curing.
Industrial Line
Fully compatible with automatic and manual natural stone processing lines.
Field Support
Technical application consultancy specific to stone type and kiln regime.
Marble Mesh
PRODUCT CODE: Marble Mesh
Fiberglass mesh used for back-surface reinforcement of natural stone slabs.
Sistem Tipi
Two Component Epoxy (A+B)
Binding Strength
High Mechanical Adhesion
Application Direction
Yatay / Dikey Blok & Plaka
Surface Compatibility
Marble, Granite, Natural Stone
Compatible Surfaces & Application Areas
Product Engineering Profile
Marble Mesh — Technical Evaluation
Marble Mesh is a professional solution in our reinforcing meshes product line. Please consult the APOX Kimya technical team for application suitability and up-to-date technical specifications.
APOX epoxy adhesive systems are engineered to deliver high penetration and minimal shrinkage across natural stone block consolidation, crack repair, and slab meshing lines, reducing production waste through reaction profiles tailored to ambient temperatures and stone porosity.
Technical Specifications & System Parameters
Marble Mesh- Specification
- 3,5 × 2 mm / 56 gr/m²
- Average weight
- ≥ 56 gr/m²
- Resin content
- %18–20
- Recommended Application Areas
- Marble, Slab reinforcement
- Chemical Structure
- Modified epoxy resin and special hardener system
- Application Temperature
- Industrial line environment between +10 °C and +35 °C
- Storage and Shelf Life
- 12 months in a dry and cool environment in its original closed packaging
- Quality Control Standard
- APOX R&D batch-based viscosity and cure verification
Field Application Protocol
4-Step Recommended Application & Process Guide
STEP 01
Surface Preparation
Completely clean the natural stone surface to be applied from dust, oil, moisture and loose particles.
STEP 02
Homogeneous Mixture
Mix components A and B in the weight/volume ratio specified in the product technical sheet until a homogeneous color is obtained.
STEP 03
Application to Surface
Spread the prepared mixture on the crack, pore or joint surface with a spatula or appropriate equipment, leaving no gaps.
STEP 04
Curing & Processing
After the curing period depending on the ambient temperature and oven line regime is completed, proceed to the cutting and polishing process.
Catalog & Product Family
Related & Complementary Product Solutions
abrapox
★ FEATURED
apox
★ FEATURED
apox
★ FEATURED
DIAMOND SKF24
APOX DIAMOND SKF24
High penetration and extra adhesion strength on white and grey stones.
apox
★ FEATURED
BLUETECH IQ1000
APOX BLUETECH IQ1000
Ultra-low viscosity and extended yellowing resistance; high penetration on colored hard stones.
APOX
Marble Mesh
CODE: Marble Mesh
Technical Solution Desk
Let’s determine the right product for your project together.
Consult our technical team regarding surface type, application process, and product line.