Mineralogical structure of natural stone, pore character and factory production step; It is the basis for choosing the right epoxy, gel, abrasive and cutting product.
01 / SURFACE TYPES & STONE CHARACTER
Each natural stone group; It requires different resin viscosity and surface treatment discipline in terms of pore size, absorbency rate and color sensitivity.
01 · STONE & SURFACE GROUP
68 PRODUCTS
Calcite-Based Natural Stone Lines
Low Viscosity · UV Resistance · Mesh & Gel Fit
Slab reinforcement, crack filling, surface polishing, and cutting processes.
Featured Products
02 · STONE & SURFACE GROUP
1 PRODUCTS
Dense Crystalline Hard Stones
High Bond Strength · Deep Penetration · Gloss
Resin, filling, and abrasive applications suited for dense stone structures.
Related Product Categories
Featured Products
03 · STONE & SURFACE GROUP
60 PRODUCTS
Travertine, Onyx, Beige & Colored Stones
Thixotropic Filling · Clear & Tinted Systems
Reinforcement and surface processing for travertine, onyx, beige, and colored stone groups.
Featured Products
02 / PRODUCTION LINE & PROCESS GUIDE
Integrated solutions for every process step, from block wrapping and cutting to slab reinforcement, crack filling, and mirror-gloss surface finishing.
PROSES 01
28 PRODUCTS
Slab Back-Meshing & Penetration
E-Glass Mesh · Multi-Deck & Tunnel Oven Curing
Preserving slab integrity with fiberglass mesh and low-viscosity epoxy systems.
Sample Products
PROSES 02
37 PRODUCTS
Capillary Crack, Pore & Fracture Repair
Epoxy Resin · Epoxy Gel · Polyester Filler
Epoxy and polyester solutions providing high adhesion in pores, cracks, and fractured zones.
Sample Products
PROSES 03
7 PRODUCTS
Pre-Sawing Block Wrapping & Vacuum
Propol Block Gel · Block Mesh · Zero Waste
Pre-cutting block wrapping and structural reinforcement applications.
PROSES 04
0 PRODUCTS
Calibration, Honing, Polish & Antique Brush
ABRAPOX Velox · Synthetic · Extra Polish
ABRAPOX surface finishing stages ranging from calibration to final mirror polish.
Related Categories
PROSES 05
1 PRODUCTS
Block and Slab Sawing Technologies
FERDIMAR Gangsaw Blade · Diamond Cutters
Block and slab sawing with FERDIMAR gangsaw blades and diamond cutters.
Related Categories
Sample Products
Let's determine together the combination that provides the lowest wastage and highest brightness, depending on the origin of the stone you are processing, your furnace temperature, line speed and ambient humidity.
03 / APPLICATION ENGINEERING CRITERIA
Basic engineering criteria we take into account in the selection of chemicals and abrasives to prevent rework and slab breakage on the production line.
CRITERIA 01
In marbles with micro and hairline cracks, resins with low CPS value penetrate deeply into the stone; In large cavities, thixotropic gels that do not flow are preferred.
CRITERIA 02
Series with special stabilizers are used in white, crystalline and light beige stone groups to prevent the risk of yellowing and oiling (shadow) caused by sunlight or kiln heat.
CRITERIA 03
Depending on deck oven (40°C), tunnel oven, microwave or natural environment curing, gel time (20–45 min) and full cure regime are synchronized with line speed.
CRITERIA 04
The resin hardness and ABRAPOX abrasive sand arrangement work in full harmony with each other in the calibration, honing and final polishing stages of the slab resulting from gang saw cutting.
Technical Solution Desk
Consult our technical team regarding surface type, application process, and product line.
Optional cookie categories are turned off by default. You can customize your choices below or reject all non-essential cookies at any time.
Required for core security, CSRF protection, and remembering your consent choice. Cannot be disabled.
Allows the website to remember interface and language preferences across visits.
Helps us measure anonymous traffic and page speed (Google Analytics 4). Loaded only after explicit consent.
Used to measure campaign effectiveness and conversion pixels. Loaded only after explicit consent.
